Analog Devices / Maxim Integrated MAX25220/1/1B Automotive 4-Ch TFT-LCD Power ICs

Analog Devices Inc. MAX25220/MAX25221/MAX25221B Automotive 4-Channel TFT-LCD Power ICs provide symmetrical positive AVDD and negative NAVDD supplies as well as VG_ON and VG_OFF gate supplies. The MAX25221 and MAX25221B also integrates a VCOM buffer with an output voltage range above and below ground and a temperature measurement block. Both devices contain non-volatile memory so that the values of all outputs can be calibrated for the lifetime of the device, with a maximum of five calibrations. Programming is carried out using the built-in I²C interface, which can also be used to read back diagnostic information. A stand-alone mode is also available.

The temperature sensor interface block of the MAX25221 and MAX25221B measures the temperature optionally allowing the VCOM output voltage to be adjusted depending on the measured temperature.

The AEC-Q100 qualified MAX25220/MAX25221/MAX25221B are available in a TQFN32 package and are designed to operate in the -40°C to +125°C temperature range.

Features

High integration
- Synchronous boost provides AVDD of 4.2V to 10.5V at up to 200mA
- NAVDD inverter output at up to -200mA
- 15mA VG_ON output (7.6V to 20.2V) from 3x regulated charge pump
- VG_OFF (-18.2V to -5.6V) from regulated charge pump at up to -15mA (charge-pump doubler)
- Controlled sequencing during power-on and power-off of all rails
- VCOM output range +1V to -2.49V in 83mV steps (MAX25221 only)
- NTC input for temperature measurement/compensation (MAX25221 only)
Low EMI
- 420kHz/2.1MHz switching frequency with spread spectrum

I²C control/diagnostic interface with FLTB (interrupt) output
- UV diagnostics on all outputs
Versatile
- Non-volatile output voltage settings on AVDD/ NAVDD, VGON, VGOFF, VCOM, and sequencing
- Supports stand-alone operation mode after programming
Compact 5mm x 5mm TQFN32 package
AECQ100 Grade 1 qualified